Over the years, I learned to work with 3D software. In this way I was able to design my own parts as well as reverse engineer original Prodrive parts. Check the parts below!
Inside the rallycar everything of heavy metal is removed and replaced by lightweight materials like aluminium. So is the driver footrest for the drivers left foot. Reverse engineered from an original part featuring the single column of holes on the front like on the Group A Impreza (Legacy had same shape but 2 columns!).
Weight: 245gr / 0.540lbs
Price: € 150,00 + shipping
For optiomal guidance of the drivers foot on the throttle, this part was developed and placed on the gearbox tunnel. Reverse engineered from an original part.
Weight: 240gr / 0.530lbs
Price: € 150,00 + shipping
Most complicated part is for the co-driver! This footrest features 4 pockets on the back to hold the ECU/ datalogger etc. It also has holes for connectors and pushbuttons that can be operated by the co-driver (reset tripmaster/ turn on wipers).
It can be put in a car using the orginal hvac-system, but will require some small modification on the footrest. It is reverse engineered from an original part and also available for a RHD car (mirrored design).
Price: TBD
RHD version of the above mentioned LHD co-driver footrest. All the same, mirrored design for RHD cars.
Price: TBD
In front of the co-driver seat, the fire extinguisher is located on this holder. The holder itself is up to spec of the Group A Impreza, but can be used in any car and installed on any place of liking. Doesn’t come with the metal straps. Diameter of the extinguisher is 120mm.
Weight: 275gr / 0.606lbs
Price: € 195,00 + shipping (not available currently)
To fit an Odyssey size battery. Bolt-in version, handy when you passed the bodypreperation or just want to move the battery from the enginebay and don’t want to spend time welding/ painting.
Price: € 80,00 + shipping
This is a replica of the Group A fuel tank support. Normally a metal part welded in. Made it from aluminium to bolt-in. Great feature for those that don’t want to go into body work and painting but still want the looks! Can be either painted or anodised.
Price: TBD
Protect your rear trailing arms from cutting corners or though gravel stages. These 4mm polyurethane rubber (PU) guards are designed to Subaru Impreza Group A spec.
Price: TBD
Below you find the results of the produced parts.
